AGQ210A4HZ

The nominal operating power of the GQ-RELAYS ultra-small package flat polarized relay is determined by the following factors: 1. As a general rule, only a pure DC power supply should be used for the coil drive. The voltage applied to both terminals of the coil should be -5% of the rated operating voltage of the coil. The pick-up and drop-out voltages will fluctuate depending on ambient temperature and operating conditions. The ripple factor for the voltage applied to the coil should be less than 5%. For set and reset latching relays, the rated operating voltage should be applied to the coil for 10 ms or more. 2. The relay is highly sensitive to external magnetic fields, so it should not be used under conditions where a strong external magnetic field is present. 3. When cleaning the relay, it is recommended to use the boiling method for automatic cleaning. Avoid ultrasonic cleaning as it may cause the contacts to stick. A fluorinated hydrocarbon or other alcoholic solvent is recommended for cleaning. The information provided in the search results does not directly specify the exact nominal operating power in terms of watts or milliwatts for the GQ-RELAYS ultra-small package flat polarized relay. Sorry, I couldn't find the answer in the PDF.

The initial contact resistance, maximum, for the GQ-RELAYS relay when a voltage drop of 6 V DC is applied is 100 mΩ .

The maximum surge withstand voltage between open contacts for the GQ-RELAYS relay is 1,500 V .