PM50CL1B120

The dimensions of the PM50CL1B1 module are as follows: - Length: 98.25mm - Width: 55mm - Height: 25.75mm - Terminal code: 19-■0.5 - Mounting Holes: 4-φ2.5

The PM50CL1B1 module is used in applications that require stable and safe operation. It is recommended to design the PCB pattern to minimize wiring length between the opto-coupler and the module's input terminal. Additionally, it is advised to connect a low impedance capacitor between the Vcc and GND terminal of each fast switching opto-coupler. The module is suitable for use with isolated control power supplies and requires careful attention to minimize the instantaneous voltage charge of the power supply. It is also recommended to make the inductance of the DC bus line as small as possible and to minimize surge voltage using a snubber capacitor between the P and N terminal. Furthermore, the module can benefit from the use of a line noise filter capacitor between each input AC line and ground to reject common-mode noise from the AC line.

The PM50CL1B1 module features include: 1. General purpose inverter, servo drives, and other motor controls . 2. Dimensions in mm: 7.75 x 98.25 x 25.75 . 3. Terminal code for various connections . 4. Mounting holes for installation . 5. Utilizes a new 5th generation Full-Gate CSTBTTM chip . 6. Over-temperature protection to detect chip surface temperature . 7. Error output signal possible from all protection arms . 8. Compatible with L-series package . 9. 3φ 50A, 1200V Current-sense and temperature sense IGBT type inverter . MITSUBISHI <INTELLIGENT POWER MODULES>.