1182T117P

To address the issue of inrush current when using Toroidal transformers, it is recommended to consider using a slow-blow fuse, time-delayed circuit breaker, or other forms of soft start circuitry for the supply line. This is due to the superior magnetic properties of Toroidal transformers, which make them susceptible to high magnetizing current when initially energized. The overload caused by inrush current is limited by the low DC resistance of the primary winding and is rarely longer than half a cycle. Depending on where you are in the AC cycle when the transformer is energized, there is a chance of overloading the supply circuit, which may result in blowing the fuse or tripping the circuit breaker. Therefore, implementing measures such as a slow-blow fuse or time-delayed circuit breaker can help mitigate the effects of inrush current on the supply circuit. [1]

The primary voltage for the Toroid Power Transformers 1182 Series is dual 117/234 VAC, and the frequency is 50/60 Hz. [1]

Some features of the Toroid Power Transformers 1182 Series mentioned in the document include: - Low profile and lightweight design [1] - Cool running and high efficiency due to the core shape with low stray magnetic flux leakage [1] - Dual 117/234 VAC primary, 50/60 Hz operation [1] - Designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer [1] - Supplied with rubber insulating pads, metal centering washer, and mounting hardware [1] - Hi-Pot test of 4,000VAC RMS between primary & secondary [1] - Manufactured using Class B (130 degree C) materials [1] - UL recognized to UL506 (XPTQ2.Guide) UL file #E207860 [1] - CSA certified to C22.2 #66 - CSA file #209651 [1] - CE compliant to IEC 61558-2-4 [1] - Inrush current considerations due to the superior magnetic properties of Toroidal transformers [1] Toroid Power Transformers 1182 Series. [2]