FEATURES
• Tenth-generation L2+ Fast Ethernet (FE) switch with
interfaces
- 8-/16-/24-port 10/100 transceivers for TX/RX supporting auto
power-down modes
- 8/16/24 MAC and one MAC/GMAC for IMP
- Two GMACs or four GMACs or two GMACs with one 2.5G
MAC
- 10 Mbit (1.25 MB) packet buffer and control memory
- Management port with RvMII/MII or RGMII interface
• Nonblocking switch fabric
• 65 nm design with lower power consumption
• Pin-to-pin compatible with earlier generation BCM532x2:
- BCM53282 pin-to-pin compatible with BCM53202
- BCM53283 pin-to-pin compatible with BCM53212
- BCM53284 pin-to-pin compatible with BCM53242
- BCM53286 pin-to-pin compatible with BCM53262
• Optimized for managed-switch design
• Fully compliant with DSL Forum TR-101 (Migration to
Ethernet-based DSL Aggregation)
• Flexible TCAM-based Compact Field Processor with four
slices for packet classification and filtering
• VLAN Features
- Packet Remarking, S-VID, C-VID flexible mapping
- Flexible QinQ support (add/drop one or two VLAN tags)
- Ingress VLAN Mapping and Egress VLAN Mapping
- S-Tag and C-Tag PCP/DEI, DSCP remarking
- Programmable global ISP_TPID
- IEEE 802.1™Q-based VLAN with 4K entries
- Port-based VLAN
- MAC-based VLAN
- Protocol-based VLAN
- VLAN-based direct forwarding
FEATURES (CONT.)
• MAC Address Learning
- 16K MAC addresses: automatic learning and aging
- 4K-entry multicast address table
- Enable/disable MAC learning based on per-port, per-VLAN,
or per-packet flow (Compact Field Processor)
• Virtual Multicast Packet Replication
• Port mirroring (Ingress/Egress), IGMP/MLD snooping
• Spanning Tree support (IEEE 802.1d/1s/1w)
• Link Aggregation support with automatic link failover
• Supports IEEE 802.1x Extensible Authentication Protocol
Over LAN (EAPOL) higher layer protocol
• Denial of Service (DoS) attack prevention
• Supports IEEE 802.3ah OAM remote loopback and trap
OAM protocol packets to IMP port
• Hardware supports remote monitoring (RMON)
• Jumbo frame support of up to 2048 bytes
• Programmable Broadcast, Multicast, and Unknown Unicast
storm control
• Programmable per-port and per-queue Bandwidth/Rate
control, enable or disable IPG and Preamble Start Frame
Delimiter (SFD) included
• Min Bandwidth guarantee and Max Bandwidth limit
scheduler
• IEEE 802.1p-, Port/Virtual Port-, Protocol-, VID-, and
DiffServ-based (IPv4/IPv6) QoS packet classification with
eight priority queues per port
• MDC/MDIO and SPI interfaces; SPI speed of up to 25 MHz
• Internal oscillator simplifies design and reduces cost.
• JTAG
• Only two power rails required: 2.5V and 1.2V. 3.3V is
optional.
• Typical power consumption (all ports running at full speed
with full traffic at normal voltage at room temperature):
- BCM53282: 1.5W
- BCM53283: 2.6W
- BCM53284/BCM53286: 3.6W
- BCM53288: 4.0W
OVERVIEW
Request a quote BCM53282MKPBG at censtry.com. All items are new and original with 365 days warranty! The excellent quality
and guaranteed services of BCM53282MKPBG in stock for sale, check stock quantity and pricing,
view product specifications, and order contact us:[email protected].
The price and lead time for BCM53282MKPBG depending on the quantity required, please send your request to us,
our sales team will provide you price and delivery within 24 hours, we sincerely look forward to cooperating with you.
We highly value your feedback. Please share your most genuine review.
*Kindly log in to your account before posting a comment