EPCS4SI8N

The operating voltage range for the serial configuration devices is from -0.6V to 4.0V for EPCS1, EPCS4, and EPCS16, and from -0.2V to 4.0V for EPCS64 and EPCS128.

The re-programmable memory of the serial configuration devices can support erase/program cycles. The EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128 devices all have reprogrammable memory with support for erase/program cycles. The devices offer features like low cost, low-pin count, and non-volatile memory, making them suitable for various applications. Additionally, these devices operate within a voltage range of 2.7V to 3.6V, providing flexibility in different scenarios. The EPCS devices come in different memory sizes ranging from 1,048,576 bits to 134,217,728 bits, catering to different memory requirements .

The serial configuration devices mentioned in the PDF provide the following features: - 1-, 4-, 16-, 64-, and 128- Mbit flash memory devices that serially configure Arria®series, Cyclone® series, all device families in the Stratix® series except the Stratix device family, and FPGAs using the active serial (AS) configuration scheme . - Easy-to-use four-pin interface . - Low cost, low-pin count, and non-volatile memory . - Low current during configuration and near-zero standby mode current . - 2.7-V to 3.6-V operation . - EPCS1 and EPCS4 available in 8-pin small outline integrated circuit (SOIC) package. EPCS16 available in 8-pin or 16-pin SOIC packages. EPCS64 and EPCS128 available in 16-pin SOIC package . - Enables the Nios® processor to access unused flash memory through AS memory interface . Configuration Handbook (Complete Two-Volume Set) © December 2009 Altera Corporation.