TPS610982DSER

The minimum input voltage required for the TPS61098 to operate is 0.7V at startup [7].

The body size of the TPS61098 package is 1.50 mm x 1.50 mm. [5]

The TPS61098x features two operation modes controlled by the MODE pin: the Active mode and Low Power mode. [1] In Active mode, both the boost converter and the integrated LDO/load switch are enabled, providing dual outputs simultaneously. [1] The MODE pin is usually controlled by an I/O pin of a controller and should not be left floating. [1] In Low Power mode, the TPS61098x can provide ultra-low quiescent current, extending battery runtime in sleep mode. [1] The main differences between the two modes of the TPS610982 are the quiescent current and performance. [1] The TPS61098x also supports automatic pass-through function in both Active mode and Low Power mode. [1] When the input voltage (VIN) is detected higher than a pass-through threshold, the boost converter stops switching and passes the input voltage through to V(MAIN), following VIN. [1] If VIN is lower than the threshold, the boost works in boost mode and regulates V(MAIN) at the target value. [1] Different V(MAIN) target values can be supported in Active mode and Low Power mode to meet various requirements. [1] For example, for TPS61098, the set value of V(MAIN) is 4.3V in Active mode but 2.2V in Low Power mode. [1]