The diode as shown in the figure plays a rectifying role in the product. I would like to ask what kind of effect will the circuit generally have when the component is soldered on the PCB board and the component stands up when soldering this kind of diode?
Milly Posted on November 25, 2020
Bent pins have no effect on low frequencies, high frequencies may have parasitic inductance, which will make the tube turn-off spikes larger, but for such a small tube, there should be no problem if the current is not that large. However, from the perspective of mechanics, devices with higher height have poorer mechanical properties.
Memphis Posted on November 25, 2020
It has no effect.
Dwayne Posted on November 25, 2020
The difference lies in the different installation methods:
1 The mechanical performance is different, and the difference is different under the vibration environment.
2 The heat dissipation performance is different, mainly depending on the gas flow direction.
