user image

What should we pay attention to the layout of all components in the circuit?

Development board
May 5, 2019 by Robin Lakhani 161

What should we pay attention to the layout of all components in the circuit?

All Comments

user image

Lucas Posted on 2019-05-05

The core component of the functional circuit is centered and laid out around it. Components should be arranged evenly, neatly and compactly on the PCB. Minimize and shorten leads and connections between components.
0
user image

Mitra Mulia Posted on 2019-05-05

Arrange the position of each functional circuit unit according to the flow of the circuit, so that the layout facilitates signal circulation and keeps the signal as consistent as possible.
0
user image

Ricardo E. Posted on 2019-05-05

For circuits operating at high frequencies, the distribution parameters between components should be considered. In general, the circuit should be arranged in parallel as much as possible. This way, not only beautiful. And it is easy to load and weld. Easy to mass produce.
0
user image

Jose Posted on 2019-05-05

The components ,which located at the edge of the board , are generally not less than 2mm from the edge of the board.
0
user image

Mike Posted on 2019-05-05

The optimal shape of the board is rectangular. The aspect ratio is 3:2 to 4:3. When the board surface size is greater than 200x150mm. The mechanical strength of the board should be considered.
0
user image

Alex Posted on 2019-05-05

High-frequency circuits should consider the distribution parameters between components.
0
user image

Jojo Posted on 2019-05-05

The deepest impression is that the power cable can’t under the crystal.
0
user image

Derek Posted on 2019-05-05

Pay attention to the processing of the signal source, and try not to cross the different power supply parts.
0

Write an answer

You need to log in to reply. Sign In | Register