• Sign In / Register
  • Language
    • English
    • Deutsch
    • Française
    • Español
    • Português
    • Italia
    • Русский
    • 日本語
    • 한국어
    • 简体中文
    • 繁體中文
user image

Who knows about the HT7536, when the input voltage is high, it is easy to burn the tube.

Development board
May 5, 2019 by Robin Lakhani 391

Who knows about the HT7536, I meet the  a problem now, when the input voltage is high, it is easy to burn the tube. The 12V input will burn out, but the input voltage of the specification is quite high. Who knows? Thank you


All Comments

user image

Rory Ryan Posted on May 5, 2019

In addition the input voltage can not exceed the range allowed by the device, also pay attention to the power consumption when the voltage difference is too large. When the input and output voltage difference is large, the 78 series should be selected instead of the LDO. If the current is large, it is better to use a switching power supply.
0
user image

Mike Farrell Posted on May 5, 2019

First of all, we must confirm whether the component is genuine or not. There are many imitation materials on the market, and the withstand voltage is only 18V.
Secondly, the voltage difference multiplied by the load current is the dissipated power. Here, the voltage difference of 8.4V, if it is SOT89 package, the load current should not exceed 30mA, otherwise there is a risk of burning.
0
user image

Harold Hewett Posted on May 5, 2019

If the voltage is too high, it will break down and the power consumption will burn out.
0
user image

Andrew Weiss Posted on May 5, 2019

The load current is too large, which exceeds the heat dissipation capability of the package. If you don't increased heat dissipation. ,than change the DC-DC.
0
user image

Robert Randise Posted on May 5, 2019

General, you had better to use a lower voltage than specification writen.
0

Write an answer

You need to log in to reply. Sign In | Register

Select Your Location